RTS Cstrunk Specifiche Pagina 83
- Pagina / 104
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
77
Configure the RVON-1 from the KP 812
Top Level Menu, Service, Rvon Setup
Set the IP Address from the Service Level Menu
The RVON-1 card, when shipped has a default IP Address already configured. This must be changed in order for the RVON-1
card to function properly because the pre-configured IP Address may not work with you network.
To set the IP Address, do the following:
1. On the KP 812, scroll to Menu.
The top level menu appears.
2. Turning the encoder knob, scroll to Service.
3. Tap the encoder knob to select Service.
The Service menu appears.
4. Turning the encoder knob, scroll to RVON Setup.
5. Tap the encoder knob to select RVON Setup.
The IP Address menu item appears.
6. Tap the encoder knob to select IP Address.
The actual IP Address appears.
7. Enter the first number in the IP Address.
This activates the first octet of the IP Address and clears the rest of the IP Address.
8. Tap the encoder knob.
This confirms the first octet in the IP Address and moves you to the second octet.
NOTE: Tap the encoder knob to skip over any octet that does not need modifications.
9. Repeat steps 7 and 8 until the entire IP Address is entered.
10. Tap the encoder knob.
The Netmask menu item appears.
NOTE: Once you have enter the IP Address, you will then enter the Netmask. The Netmask is a string of
number similar to an IP Address, except that it masks or screens out the network part of an IP
Address so that only the host computer part of the address remains (for example, 255.255.255.0).
11. Tap the encoder knob to select Netmask.
The actual Netmask appears.
12. Enter the first number in the Netmask.
This activates the first octet of the Netmask and clears the rest of the Netmask.
13. Tap the encoder knob.
This confirms the first octet in the Netmask and moves you to the second octet.
NOTE: Tap the encoder knob to skip over any octet that does not need modification.
14. Repeat steps 13 and 14 until the entire Netmask is entered.
15. Tap the encoder knob.
The Gateway IP Address menu item appears.
NOTE: Once you have entered the Netmask, you may need to enter the Gateway IP Address. A Gateway is
a node (for example, a computer) on a network that serves as an entrance to another network.
16. Tap the encoder knob to select Gateway.
The actual Gateway IP Address appears.
- USER INSTRUCTIONS 1
- Contents 3
- Introduction 9
- GPI Connector Module 10
- EKP-632 Expansion Keypanel 11
- LCP-632 Level Control Panel 11
- MCP-90 Panel Microphone 12
- Headsets 12
- Installation 13
- Address Switch Setting 14
- Address Setting for Zeus 15
- Address Setting for ADAM CS 15
- Connections 16
- Power Supply Connector 17
- Headset Connector 17
- Panel Microphone Connector 18
- Basic Operation 19
- Intercom Keys and Displays 20
- Listen LED Indication 21
- Intercom Key Operation 22
- Muting the Microphone 23
- Call Waiting Operation 24
- Telephone Operation 25
- KP9X Redial Sequence 26
- KP9X Autodial Sequences 26
- Manual Dialing 27
- Autodial 28
- Display Panel ID 29
- > Tap CLR to quit 29
- 1. Tap the E-PNL key 32
- 3. Tap the PGM key 32
- • Tap COPY 35
- Clearing a Key Assignment 35
- KP-632 Menu System 37
- Menu System, Key Assign Menu 39
- Key Assign Menu, Matrix 40
- Key Assign Menu, Pt-to-Pt 40
- Key Assign Menu, Party Line 40
- Key Option Menu 43
- Key Option Menu, Key Groups 44
- Key Option Menu, Solo 44
- RVON Conn. Menu 45
- Service Menu 45
- Service Menu, Baud Rate 46
- Service Menu, Dim 46
- Service Menu, Disply Dim 46
- Service Menu, Hdst Sel 48
- Service Menu, LCD Bright 48
- Service Menu, Matrix Out 51
- Service Menu, Mic Select 51
- Service Menu, Min Volume 51
- Service Menu, Mod Assign 51
- Service Menu, Output Level 52
- Service Menu, Reset Cfg 53
- Service Menu, Save Cfg 53
- Service Menu, Scr Saver 53
- Service Menu, Sidetone 54
- Service Menu, Snoop Tally 54
- Service Menu, Test Panel 54
- Service Menu, Tone Gen 54
- Specifications 55
- Speaker Amplifier and Speaker 56
- KP9x Display Sequences 63
- KP9x Setup Page Assignment 64
- KP9x Phone Operation 65
- Menu Access 67
- Menu List 68
- Mode 2 Operation 69
- Glossary 71
- Features 77
- Dip Switches 79
- Addresses and the RVON-1 82
- Top Level Menu, Rvon Conn 84
- Basic Network Configuration 87
- Wide Area Network 89
- TABLE 4. Packet Translation 90
- TABLE 5. Packet Translation 90
- IP Addresses 92
- Ping a Computer 93
- RVON Configuration 95
- Network Terminology 96
- • Backcard DB-9 J2 98
- Press Enter 100
- 3. Press Enter 101
Prodotti e manuali riguardandi Sistemi di interfono RTS Cstrunk
Sistemi di interfono RTS CIF-612 Specifiche
(72 pagine)
(72 pagine)
Sistemi di interfono RTS TR-240 Specifiche
(86 pagine)
(86 pagine)
Sistemi di interfono RTS BP300 Manuale Utente
(18 pagine)
(18 pagine)
Sistemi di interfono RTS TWI224 Manuale Utente
(39 pagine)
(39 pagine)
Sistemi di interfono RTS RVON-I/O Manuale Utente
(60 pagine)
(60 pagine)
Sistemi di interfono RTS TM-2000 Manuale Utente
(28 pagine)
(28 pagine)
Sistemi di interfono RTS XCP-24 Manuale di Servizio
(114 pagine)
(114 pagine)
Sistemi di interfono RTS MRT327 Manuale Utente
(12 pagine)
(12 pagine)
Sistemi di interfono RTS XCP-955 Manuale Utente
(49 pagine)
(49 pagine)
Sistemi di interfono RTS BP-325 Manuale Utente
(39 pagine)
(39 pagine)
Sistemi di interfono RTS XCP-ADAM-MC Specifiche
(19 pagine)
(19 pagine)
Sistemi di interfono RTS TR-240 Specifiche
(20 pagine)
(20 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale