RTS Cstrunk Specifiche Scaricare il pdf (Pagina 44)

Key Option Menu, Key Groups

You can set up a key group, so that when you activate one key (the master key) all keys in the group will activate. Up to 4 key

groups can be set up.

1. Select Key Groups

then tap PGM.

Group 1 displays. To select a different group, press

↓↓

↑↑.

2. Tap PGM.

Tap Master displays. The master key is the key you press to activate the group.

3. Tap the intercom key you want to use as the master.

Both LEDs next to the key will light red.After you select the master key, Tap Slaves displays. Slave keys are the keys

that will activate along with the master key.

4. Tap one or more keys to select them as slave keys.

Both LEDs will light green for each key that is selected. You can tap a key again to remove it from the key group.

5. Tap CLR when finished.

Activating the master key should now cause it and all slave keys to activate. The LEDs for each key will activate

according to the current key assignment for that key.

6. Run Service Menu, Save Cfg, to store Key Group settings.

NOTE: Key group settings will continue on keys even if you change the key assignments.

Clearing a key group

1. Select Key Groups, and then tap PGM.

Group 1 displays. To select a different group, press

↓↓

↑↑

2. Tap PGM.

Tap Master displays.

3. Tap the current master key.

The LEDs will remain lit red. After you tap the master key, Tap Slaves displays.

4. Tap all the keys where the LEDs are lit green.

This turns the LEDs off.

5. Tap CLR when finished.

The key group is now cleared.

6. Run Service Menu, Save Cfg, to store the cleared key group setting.

Key Option Menu, Solo

A solo key will cause all other keys to turn off when activated. You can assign one solo key.

1. Select Solo, and then tap PGM.

Tap Key displays.

2. Tap a key.

Both LEDs for the key will light red to confirm the assignment. Tap the key again if you made a mistake and want to

remove the assignment.

3. Tap CLR when finished.

Activating the solo key should now cause all other activated keys to turn off. The keys will turn back on again when

you turn off the solo key.

4. Run Service Menu, Save Cfg, to store the Solo setting.

NOTE: The solo option will continue on a key even if you change the key assignment.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 103 104

Commenti su questo manuale

Nessun commento

RTS Cstrunk Specifiche Pagina 44

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di interfono RTS Cstrunk