RTS TR-240 Istruzioni per gli Interventi Scaricare il pdf (Pagina 45)

System Walk-Thru

Now that you have successfully “set-up” your Telex Wireless

Intercom System and turned on any auxiliary equipment, you

are ready to test the overall performance by “Walking” the

Telex system through the areas in which you will be using it.

Before you begin your walk-thru, check the following:

❒

Beltpack Battery Check.

❒

Set microphone gain in both the beltpack(s) and the

base station.

❒

The base station and beltpack(s) are on the same group

and the beltpack(s) are on their own unique transmit

channels that match the base station receive channels

❒

Check that the talk button is engaged. The talk LED

will be illuminated.

❒

Intercom Level “IN” and “OUT” are set to an appro-

priate level.

❒

Auxiliary Level “IN” and “OUT” are set to an appro

priate level (if used).

The “system walk-thru” can detect problem of weak signal

strength caused by:

•

Poor antenna location

•

Wrong antenna for receiver and/ or transmitter

•

RF “Trouble Spots”

•

Operating distance beyond system capability.

•

Old or used batteries in the TR-700.

Under normal conditions the base station’s display will indicate

a beltpack status. “Weak Signal” condition will result in “no tx”

being displayed on the base station’s receiver for that beltpack.

In 99% of all instances you will set up your Telex Wireless In-

tercom System, walk it through the area of interest and

achieve error-free performance. If in the rare instance your

Telex system does not “pass” during your walk-thru evalua-

tion, refer to the section of this manual which deals with Sys-

tem Troubleshooting.

7-1

Section

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 64 65

Commenti su questo manuale

Nessun commento

RTS TR-240 Istruzioni per gli Interventi Pagina 45

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di interfono RTS TR-240